0.5 Micron Portable Bag Filter Housing Systems For Industrial Wastewater Treatment
Description:
Bag filter is a widely used for liquid filtration,it can remove the particles of different size
from liquid,in order to achieve liquid filtration,purification,separation,recovery purposes.It consists of three parts:bag housing,supporting basket and filter bags.According to flow
rate,you may use multiple bags in a bag housing.First,the liquid enter into the housing
from the inlet,which may placed in the side or on the top,and then flow into the filter bag
which is braced by basket.Due to the impact pressure of fluid,the bag will extend and the
liquid get evenly filtered through the bag and flow out of the outlet pipe.Impurities are
trapped in the bag,the filtration process is complete.When you replace or clean the bag,
just simply loosen the bolt,rotary hand wheel lifting the lid,and get the bag.
Specifications: (The practical dimension could be customized )
| Model |
Flow rate
(T/H)
|
inlet and outlet diameter |
Quantity of the bags
|
Filter size
|
Bag Specifications
|
Filtration Area
(M2)
|
| YL-1-219 |
20 |
DN50mm |
1
|
219*410
|
180*410
|
0.23
|
| YL-2-219 |
40 |
DN65mm |
1
|
219*810
|
180*410
|
0.46
|
| YL-2-400 |
50-80 |
DN80mm |
2
|
400*810 |
180*810 |
0.92
|
| YL-2-500 |
120 |
DN100mm |
3 |
500*810
|
180*810
|
1.38
|
| YL-2-550 |
140 |
DN100mm |
4
|
5500*810
|
180*810
|
1.8
|
| YL-2-600 |
150 |
DN125mm |
4
|
600*810
|
180*810
|
1.8
|
| YL-2-650 |
160 |
DN125mm |
5
|
650*810
|
180*810
|
1.84
|
| YL-2-750 |
200 |
DN150mm |
6
|
750*810
|
180*810
|
2.3
|
| YL-2-800 |
220 |
DN100mm |
8
|
800*810
|
180*810
|
2.5
|
| YL-2-850 |
240 |
DN200mm |
9
|
850*810
|
180*810
|
2.76
|
• Material of construction: SS 316L, SS 316, SS 304, Carbon Steel (All Grade), mild steel, alloy metals, polypropylene, lead lining, rubber lining, teflon lining
• Sizes Cartridge Filter Housings Suitable for: 1Nos To 200 Nos. Of Cartridges in Single Housing,
2”, 2.5”, 4”, 6” & 8”
• Diameter of Cartridge, 10” to 60” Long Filter cartridge, Flow Rate
• Capacity: Up to 2000 m3 /hr
• Gasket / O Ring Material: Neoprene, Nitrile, Silicone, Viton, Buna N, EPDM, PTFE
• Cartridge Filter Housing Suitable for Filter cartridges of: Double Open End (DOE) Type, Code 7
(226 O Ring) Design, Code 3 (222 O Ring) Design, NPT Threaded Connection Type, End Connections Available, NPT / BSP Threaded, Flanged Table E / Table F, ANSI B 16.5, ASA 150 RF, DIN Standard,
Tri Clover Adaptors and SMS /Dairy End Connection
Application:
1. Food and beverage industry: beer, wine, wine, sake, liquor, wine, fruit juice, bottled
water, tea drinks, soy milk, syrup, dairy products, food additives, water filtration to
clarify the process and CIP.
2. Petrochemical industry: all kinds of lubricants and oil, glue, chemical fiber manufacturing process of various solution was filtered.
3. Oil and gas industry: amine desulfurization, dehydration flux filter, oil field water,
completion fluid filtration.
4. Car paint, painting industry: paint, electrophoretic paint, pre-treatment fluid, paint
and paint raw materials and solvent filtration
5. Textile, printing and dyeing, paper making industry: spinning liquid, dyes, flux, water, additives, adhesives filter.
6. Edible oils and soap industry: polishing purification of edible oil, soap raw materials
and water filtration.
7. Pharmaceutical industry: a variety of pharmaceutical intermediates, pharmaceutical raw materials, solvent filtration.
8. The electronic and electroplating industry: a variety of plating solution and water
filtration.
9. Machining industry: a variety of cutting fluid, coolant and cleaning liquid filtration.
10. Other liquid filtration.
FAQ:
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this bag filter?
Stainless steel (SS304/SS316)?
03. What is the working pressure for it?
04. What is the filtration degree?
10 micron or 200 micron?
Details:
Your message must be between 20-3,000 characters!
